Medical
Medical Device PCB CAM
CAM, DFM, and HDI engineering for medical electronics under ISO 13485 and IEC 60601, from implantables to diagnostic instruments.
In plain English
Circuit boards for medical equipment like monitors and implants, where safety and reliability are tightly regulated because people's lives depend on them.
Outcome
Traceable, high-reliability boards that support device-file documentation and long product lifecycles.
Medical electronics span tiny implantable and wearable boards through large diagnostic instruments. What unites them is a regulated quality system and a low tolerance for field failure in life-affecting devices.
Quality system
- ISO 13485 — the quality-management standard for medical devices; fabrication and CAM records feed the device master record.
- IEC 60601 — safety and creepage/clearance requirements for medical electrical equipment, which drive spacing rules our DFM enforces.
- IPC Class 2/3 depending on criticality — implantable and life-support hardware typically Class 3.
Density and reliability
Wearables and implantables push HDI and microvia density hard, while diagnostic instruments demand signal integrity for high-speed data. We balance:
| Device class | CAM priority |
|---|---|
| Implantable | Miniaturization, biocompatible finish |
| Wearable | HDI density, flex/rigid-flex |
| Diagnostic | Signal integrity, controlled impedance |
| Instrument | Reliability, serviceability |
Creepage and isolation
Patient-connected circuits require isolation barriers with defined creepage and clearance. Our DFM checks these spacings against IEC 60601 working-voltage tables, not just the fab's manufacturing minimum.
Every job is delivered with a documented netlist and DFM record suitable for inclusion in the device file, supporting the long, audited lifecycle medical products require.
Related industries
Aerospace & Defense PCB CAM
Circuit boards for aircraft, satellites, and defense equipment, where a single failure could be catastrophic, so everything is built to the strictest standards.
Automotive Electronics PCB CAM
Circuit boards for cars, built to survive engine heat, constant road vibration, and many years of daily driving without ever letting you down.
Consumer & IoT PCB CAM
Circuit boards for everyday smart gadgets and connected home devices, made in huge quantities at low cost while staying small and reliable.
Start an engagement
Ready to de-risk your next build?
Send your Gerber, ODB++ or IPC-2581 package and a CAM engineer returns a clear read on manufacturability, cost drivers and lead time.
- First-pass DFM findings back within hours
- NDA-friendly, controlled-data handling
- One dedicated engineer, not a ticket queue
Request an engineering review